1、网络拓扑图如下：
2、路由器单臂路由端口设置:
------------------------------------------------------------
GE 0/0.2:
interface GE 0/0.2
vlan-type dot1q vid 2
ip address 10.0.0.1 12
dhcp select server
dhcp server select apply ip-pool vlan2
------------------------------------------------------------
GE 0/0.3:interface GE 0/0.3
vlan-type dot1q vid 3
ip address 10.16.0.1 12
dhcp select server
dhcp server select apply ip-pool vlan3
3、路由器DHCP设置:
------------------------------------------------------------
vlan2地址池:
dhcp server ip-pool vlan2
network 10.0.0.0 mask 255.240.0.0
gateway-list 10.0.0.1
forbidden-ip 10.0.0.1
------------------------------------------------------------
vlan3地址池:
dhcp server ip-pool vlan3
network 10.16.0.0 mask 255.240.0.0
gateway-list 10.16.0.1
forbidden-ip 10.16.0.1
------------------------------------------------------------
系统视图中使用dhcp enable开启路由器DHCP服务
4、核心交换机设置:
------------------------------------------------------------
GE 1/0/1:
port link-type trunk
port trunk permit vlan 2 3
------------------------------------------------------------
GE 1/0/2:
port link-type hybrid
port hybrid pvid vlan 2
port hybrid vlan 2 untagged
------------------------------------------------------------
GE 1/0/3:port link-type hybrid
port hybrid pvid vlan 3
port hybrid vlan 3 untagged
5、测试PC机地址获取，两台PC均成功获取
6、测试PC间互通，两台PC均互通成功
